1. The location is different. The sliding support and the support block are used in different positions. Take the above hanging window as an example, the sliding support is used at the corner above the window, and the support is blocked at the corner below the window, or the middle and lower part; the hinge (hinge) is installed at a different position from the sliding support. The hinges (hinge) are installed on the rotating side of the door and window sash, and the sliding supports are installed on the upper and lower (flat open) or left and right (hanging windows) sides of the window sash. Sliding stays are not used to install aluminum alloy doors.

2, the function is different. The function of the brace is different from that of the sliding brace. The sliding support supports the movement of the window sash and keeps it open. It is an important force-bearing member during the whole process, while the support only works when maintaining the opening angle of the window. The force is generally small (the force can be balanced according to the moment Find). For the same orange window, the installation position of the sliding brace is relatively fixed, while the brace can be adjusted in a larger range under the window. The length and installation position of the brace determine the range of the opening angle of the window sash.

3. The hinge (hinge) is fully functional with sliding support during the opening process of doors and windows The same, but the window sash only rotates when the hinge (hinge) is used, while the window sash using the sliding support rotates and moves at the same time. In many cases, hinges (hinge) and sliding stays can replace each other, but in some special cases, hinges (hinge) must be used. For example, hinges are generally used for side-hung windows or upper-hung windows, and slides are used for large side-hung doors and windows. It is generally difficult for the brace to meet the force requirements, and at this time, it is necessary to use multiple hinges (hinge) to bear the force together.

4. Hinges (hinge) are used on casement windows because they cannot be provided by themselves It has the same frictional force as a sliding brace, so it is often used together with a brace to prevent the wind from blowing back the window sash and damaging it when the window is opened. The sliding support is different, it can provide a certain amount of friction, so it can be used alone. The sliding support used on the casement window and the sliding support used on the upper-hung window are different in the length of the outer arm connected with the window frame. When the upper-hung window reaches a certain size, due to its own weight, it must be used with a certain support.

5. The difference in material, sliding bracing and wind bracing are generally made of stainless steel, while hinges (Hinge) There are many kinds of materials such as stainless steel and aluminum alloy.